Facebook LinkedIn
Contact us
shield-up-svgrepo-com

CPE-135-A

Type: Impact Modifier

Development / Applications

CPE-135-A is an impact modifier for rigid PVC applications. It provides good anti-caking properties, rapid melting, low-temperature impact resistance, and good mechanical properties. It is widely used in the impact modification of PVC, ABS, and ASA, as well as in films, sealing strips, waterproofing membranes, and as a processing aid in high-speed cable extrusion and helical hose construction. It is also used in some rubber applications.
Storage
This product should be stored at room temperature. Once opened, the packaging should be tightly closed.
The safety data sheet for this material is available upon request. Prolonged skin contact may cause irritation. Those handling this product should wear safety glasses and rubber gloves. In case of eye contact, rinse immediately with plenty of water. Wash exposed skin with soap and water.
25 kg bags
Download technical data sheet
Physical PropertiesSpecification
AppearanceDust 
Volatile Material (%)≤30
Tensile strength (MPa)≥4.5
Elongation (%)≥700

The recommended dosage is 3 to 13 phr, depending on the required level of impact resistance and the complete formulation.

Optimize your processes.
Start working with us.

Receive technical assistance and customized solutions in PVC and PUR additives designed to enhance your production performance.

Request assistance

Personalized service for Mexico, Central America, and South America.

Please complete the following form to receive the technical data sheet in your email.