In the toy industry, the laboratory decides before the buyer. A PVC toy is evaluated based on what can migrate from the material when a child bites, sucks, or handles it for hours, and just one poorly chosen additive—a plasticizer, a stabilizer, a lubricant—can cause the entire batch to fail. That's why the compound is built from compliance backward.
From our warehouse in Mexico we supply toy additives that comply with: DOTP plasticizer (EN 71-3), alkylphenol-free stabilizers (MW-33, MW-11, LOX-4M-40) and lubricants EN 71-3 (MEG-40, MOG, Adilub LPS), in partial lots.
We work with manufacturers who need compliance documentation to export or sell to chains that require it. We deliver in smaller quantities or by full container load at preferential rates.
Hollow pieces produced by rotational molding from plastisol, where the paste must flow and gel evenly to achieve a uniform thickness without weak points. Because this product is used in water and stored moist, mold and staining are frequent consumer complaints.
Casting is done with low-viscosity plastisol, which must replicate the details of the mold and demold without deformation. The initial color and its retention over time are essential to the product: a doll that yellows on the shelf won't sell.
The flexible part is subject to the same scrutiny as the toy, because the child handles it and puts it in their mouth. When the sole is foamed, the foaming system defines the density and uniformity of the cell.
The most demanding application in the industry: direct and prolonged contact with the child's mouth. Here, the criterion is to reduce the system to the essentials and choose each component based on its migration profile, not its process performance.
| Function | Chemical Additives Products | Specific application |
|---|---|---|
| Paste resin | PVC resin K71, K76 | Rotational molding inflatables, dolls and figures cast by casting; microsuspension homopolymers, with low viscosity and good air release |
| High porosity suspension resin | K 70 PVC Resin | Injection-molded sandals and children's footwear, and other injection-molded parts |
| Function | Chemical Additives Products | Specific application |
|---|---|---|
| Restricted phthalate-free plasticizer | DOTP | The base of the toy compound |
| Low-temperature plasticizer | DOA | Blends for cold flexibility |
| General purpose plasticizer | DINP | With the applicable usage restriction on items that may be put in the mouth |
| Function | Chemical Additives Products | Specific application |
|---|---|---|
| MgAlZn powder | MW-33 | EN 71-3, free of alkylphenols |
| CaZn powder | MW-11 | High toxicological requirements |
| BaZn low viscosity | LOX-4M-40 | Plastisol dolls |
| Function | Chemical Additives Products | Specific application |
|---|---|---|
| Soybean epoxidized | Epoxidized Soybean Oil (ESBO) | It captures HCl and improves thermal and light stability. |
| Function | Chemical Additives Products | Specific application |
|---|---|---|
| Internal lubricant | MEG-40, Adilub LPS | They reduce the viscosity of the paste and facilitate the process |
| Lubricant and anti-seize | MOG | Prevent the pieces from sticking together during storage |
| Function | Chemical Additives Products | Specific application |
|---|---|---|
| foaming agent | AC-7000 | Foamed children's sole; fine particle of 3 to 5 microns, which forms a uniform cell without cracks |
| Microsphere | Microsphere | Together with the AC-7000, it maintains an even cell and reduces yellowing. |
| Foam activator | Zinc Stearate | Controls the activation of the foaming agent |
| Function | Chemical Additives Products | Specific application |
|---|---|---|
| Antimicrobial agent | Zinc pyrithione | Bath toys, pool toys and inflatables: inhibits the growth of bacteria and fungi on pieces that are used and stored wet, preventing stains, bad odors and degradation |
| Rule | Applicable Chemical Additives | Relevance |
|---|---|---|
| EN 71-3 | DOTP, MW-33, MEG-40, MOG, Adilub LPS | Migration of certain elements; European reference and the most requested by retail chains |
| Free from alkylphenols (BPA, nonylphenol) | MW-33, MW-11 | Safety requirement for children's products |
| Free from restricted phthalates | DOTP | CPSIA requirements in the United States and self-service chains |
| Phthalate-free | LOX-4M-40 | His profile already positions him for PVC shoes and dolls. |
| FDA 21 CFR | MW-11 | Parts with additional toxicological requirements |
In Mexico, toys intended for children up to 12 years of age are regulated by NOM-252-SSA1-2011, Environmental Health. Toys and School Supplies. Bioavailability Limits of Heavy Metals, published in 2012 and mandatory for anyone who manufactures, imports, or sells toys in the country. It establishes bioavailability limits and testing methods for lead, antimony, arsenic, barium, cadmium, chromium, mercury, and selenium. Importantly for manufacturers, it covers not only coatings but also the base material of the toy, including polymers. It replaced the previous NOM-015/1-SCFI/SSA-1994.
For export, the framework changes. EN 71-3 is the European standard and the one most requested by retail chains; in the United States, they apply CPSIA and ASTM F963.
In all cases, the verification is done on the finished toy. Our role is to provide additives with the appropriate profile so that your compound passes these tests, and to deliver the manufacturer's documentation for your records.
Immediate availability in national warehouse. Plasticizers, stabilizers and lubricants with compliance profile in stock for delivery in 24-72 hours within Mexico.
Partial lots or full container loads at preferential prices. We deliver in the quantity that suits your operation.
One-stop-shop for your toy formulation. Resin, plasticizer, stabilizer, lubricants and epoxidization with a single supplier and a single traceability.
Letters of compliance upon request. Manufacturer documentation to support your file with the laboratory, retail chain, or customs.
Backup in crisis. If your usual supplier experiences delays or changes specifications without notice, we'll cover you with qualified material within days.
Recommendation: Build the compound on DOTP (EN 71-3) and avoid restricted phthalates; in biters, the cleanest system (DOTP + MW-33 + lubricants EN 71-3).
Recommendation: use alkylphenol-free stabilizers (MW-33, MW-11).
Recommendation: low viscosity plastisol (LOX-4M-40) and suitable melt plasticizer.
Hollow pieces retain water inside and are stored damp, ideal conditions for mold growth that consumers immediately notice, resulting in returns. Recommendation: The problem is addressed at the formulation stage by incorporating a broad-spectrum antimicrobial agent into the piece. Contact us to determine the dosage.
Talk to us on WhatsApp.
Do you prefer the finished compound? Check out the Chemical Compounds portfolio. View portfolio.
